Products

Products

Aluminum Coil 1060

Aluminum coil ‘s thickness :0.1mm-10mm.

Anti-corrosion and rust special aluminum coil’s thickness:0.3mm-3mm.

Aluminium coil for power plant’s thickness0.5mm,0.6mm,0.75mm,0.8mm.

Color coated aluminium coil/Embossed aluminum coil’s thick:0.2mm-1.2mm.

Have plenty of inventory, can delivery within 7days

We can accept any third party inspection.

Product Details

According to GB/T3190-1996, the 1060 pure aluminum up to 99.6%.1060 is industrial pure aluminum, with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but low strength, heat treatment can not strengthen the machinability is not good; Gas welding, hydrogen welding and contact welding, not easy to braze; Easy to withstand all kinds of pressure processing and extension, bending.

And the 1060 coil’s chemical component:

Al:99.6%;Si:≤0.25; Cu:≤0.05; Mg:≤0.03; Zn:≤0.05;Mn:≤0.03;Ti:≤0.03;Fe:0.35

Heat treatment regime:

(1)Complete annealing: heating 390 ~ 430℃; The insulation time is 30 ~ 120min depending on the effective thickness of the material. At the speed of 30 ~ 50℃/h, the furnace is cooled to 300℃, and then air cooled.

(2)Rapid annealing: heating 350 ~ 370℃; The insulation time is 30 ~ 120min depending on the effective thickness of the material. Air or water cooling.

(3) Quenching and aging: quenching 500 ~ 510℃, air cooling; Artificial aging 95 ~ 105℃,3h, air cooling; Natural aging room temperature 120h.

Standard Specification of 1060 Aluminum Coil:
Thichness 0.1mm-10mm
Width 19mm-2650mm
Length as customer's requirements
Grade 1070,1060,1050,1030,1100,2017,2024,2117,2014,2214,2618,2018,2218,2219,2021,3003,5052,5154,5083,5456,5056,6165,6061,6055,6063,7001,7178,7075,
Temper HO,H12,H14,H16,H18,H19,H22,H24,H26,H28,F,H112,T651,T3,T451,T4,T6,etc
Surface Flat , mill, bright, polished, hair line, brush,sand blast, checkered,embossed, etching ,spray paint, electroplate, anodic oxidation, infiltration, oil spraying, sand blasting
Sample Free sample fee
Back lamination polykraft paper, polysurlyn, kraft paper, craft paper
Inspection SGS,or other Third Party inspection
Payment T/T, L/C,Western Union,
Pyaterm EXW,FOB,CIF,CFR
Package PVC+ waterproof paper + strong sea-worthy wooden package

Application

In the process of cold rolling aluminum coil, due to the friction and pressing between the roller and the surface of aluminum plate, the surface of aluminum oxide powder will fall off and adsorption, rolling oil and its attached suspended components will remain on the surface of aluminum coil, which will adversely affect the processing of aluminum coil composite, coating and other finished products. Due to the severe bending deformation of the strip on the roller, part of the tension exerted on the strip is converted into the pressure of the strip on the tension roller, and finally forms the friction force to drive the roller set. If the surface of the alumina roll is not cleaned, the alumina powder falls off when it is deformed, and it is attached to the roller surface of the tension roller with oil pollution, so that the roller surface is worn, and the aluminum plate is slightly damaged, so it must be cleaned by a special cleaning device.

Packing

Anti-water paper and plastic+covered by iron sheet+ strapped with min three strapping strips+ fixed on the iron or wooden pallets by strapping strips.

Shipping time

Ship goods within 5 days after received deposit for stock goods ;

Customize size need about 10 days to ship;

OEM products need about 15 days to ship


Shipping

Shipping by containers ;Shipping by bulk ship 

send message

  • *
  • *
  • *
  • *

Home Tel Mail Inquiry